Muc-Off No Puncture Hassle Tubeless Sealant 500 ml

C$30.99
Muc-Off No Puncture Hassle Tubeless 500 ml is a tubeless sealant that seals holes up to 7 mm. Its ammonia-free, non-corrosive and CO2-compatible formula works from -20°C to +50°C, and the UV dye reveals punctures you missed during your ride.

Muc-Off No Puncture Hassle Tubeless 500 ml: a tubeless sealant that keeps you rolling

Seals holes up to 7 mm so the ride keeps going

This sealant closes punctures and tears up to 7 mm, well beyond what many formulas handle. It stays effective from 15 psi to 80 psi, covering low-pressure trail setups as well as firmer inflations. Once installed, it keeps working for up to 6 months.

UV dye: finally see where the tyre was punctured

The formula includes a dye visible under UV light, so the small punctures you never noticed on the trail show up clearly during an inspection. That makes it easy to judge whether a tyre is still good to go or needs a proper repair. The formula is also non-corrosive and washes off with plain water.

Who is it for?

This 500 ml bottle suits riders who set up and maintain their own tubeless tyres for mountain, downhill and enduro riding. The -20°C to +50°C range makes it a solid choice for cold-weather outings in Quebec, and CO2 compatibility means you can reinflate trailside. Browse our bike repair gear to round out your kit.

Specifications

  • Compatibility: tubeless ready and full UST wheels and tyres, mountain, downhill and enduro
  • Sealing: holes up to 7 mm, effective for up to 6 months
  • Temperature range: -20°C to +50°C
  • Working pressure: 15 psi to 80 psi
  • Formula: ammonia-free, non-corrosive, CO2 compatible
  • Contents: bamboo fibres and natural mineral glitter, UV dye

E2-Sport tip

Shake the container well before use to spread the bamboo particles, and remove any existing sealant from the tyre first: never mix two sealants, and never use this one in non-tubeless tyres. Check the remaining amount now and then to top up, apply CO2 from the top of the wheel rather than straight into the sealant, and rinse any splashes off your frame with clean water before they dry.