Muc-Off Road and Gravel Sealant 500 ml

C$30.99
Muc-Off Road and Gravel 500 ml is a tubeless sealant that seals holes up to 7 mm and holds up to 110 psi. Its synthetic latex formula is ammonia-free and stays effective from -15 °C to +50 °C, so you can ride road and gravel with confidence.

Muc-Off Road and Gravel 500 ml: a tubeless sealant that plugs holes up to 7 mm

Holes up to 7 mm: punctures sealed without stopping

Built on an advanced water-based synthetic latex, this sealant closes perforations up to 7 mm and works at pressures up to 110 psi, right in the range of road and gravel tires. Its biodegradable mineral glitter particles and bamboo fibres rush to fill the breach the moment it opens. You can inject it through a Presta valve or pour it straight into the tire during installation.

Zero ammonia, zero natural latex: a non-toxic formula

The formula is stated to be non-toxic and allergy-free, with no ammonia and no natural latex, which makes it easier to handle in a home workshop. It stays effective from -15 °C to +50 °C and resists freezing down to -15 °C. It is also CO2 compatible for quick inflation.

Who is it for?

It suits riders running tubeless setups on the road, on gravel or along gritty shoulders, where glass shards and small stones usually win the argument. Freeze resistance down to -15 °C also makes it handy for late-fall and early-spring rides in Quebec. Take a look at our bike cleaning products to round out your maintenance corner.

Specifications

  • Compatibility: road and gravel tubeless tires; applied through a Presta valve or directly into the tire
  • Sealing power: holes up to 7 mm, pressures up to 110 psi
  • Formula: advanced water-based synthetic latex, zero ammonia, zero natural latex
  • Composition: biodegradable mineral glitter particles and bamboo fibres
  • Temperatures: -15 °C to +50 °C range, freeze resistance down to -15 °C, CO2 compatible
  • Life in the tire: 3 to 6 months, 500 ml bottle

E2-Sport tip

On a new tire, degrease the inner surface to remove oils and mould-release residue, and fully remove any existing sealant: never mix two sealants together. Check the volume regularly and top it up as needed, especially in hot, dry weather above +35 °C, and when inflating with CO2, apply it from the top of the wheel rather than straight into the sealant pooled at the bottom.